产品介绍
详情
互动缸设计，增压开模减少开模缸受力延长寿命
内柱空间大、开模行程长，适合生产各种大或深的产品
采用高钢性线性滑轨，射出动作低阻力且有稳定性及持久耐用性
操作简单易学,功能显示明确
A:互动缸设计，增压开模减少开模缸受力延长寿命
B:内柱空间大、开模行程长，适合生产各种大或深的产品
C:操作简单易学,功能显示明确
D:采用高钢性线性滑轨，射出动作低阻力且有稳定性及持久耐用性
B:内柱空间大、开模行程长，适合生产各种大或深的产品
C:操作简单易学,功能显示明确
D:采用高钢性线性滑轨，射出动作低阻力且有稳定性及持久耐用性
机械配置
| 注射单元／Injection Unit | ||
| 功能描述／Function Description | 标配/●Standard | 选配/◎Option |
| 标准螺杆／Standard screw | ● | |
| 双缸平衡注射结构 ／Double balance cylinder by injection structure | ● | |
| 螺杆转速显示／Display screw rotation speed | ● | |
| 油压储料马达／Plasticizing by hydraulic motor | ● | |
| 储料背压比例控制／Backpressure by proportional valve | ● | |
| 射压曲线显示／Display injection pressure curve | ● | |
| 料管支撑架／Barrel supporting device | ● | |
| 下料口温度监测／Feed zone temperature monitoring | ◎ | |
| 喷嘴防护罩／Purger guard | ◎ | |
| 上料平台／Material-putting platform | ◎ | |
| 座台集中润滑装置／Centralized lubrication | ◎ | |
| 陶瓷加热圈／Ceramic heater | ◎ | |
| 红外线加热圈／Infrared heating ring | ◎ | |
| 气体辅助注射接口／Gas assisted injection interface | ◎ | |
| 干燥料斗／Hopper | ◎ | |
| 不锈钢料斗／Stainless steel hopper | ◎ | |
| 加长射嘴／Extended nozzle | ◎ | |
| 封闭式射嘴装置／Needle shut-off nozzle | ◎ | |
| 直驱伺服马达储料装置／Plasticizing by servo motor | ◎ | |
| 齿轮箱+伺服马达储料装置／Plasticizing by servo motor and gear box | ◎ | |
| 锁模单元 / Clamping Unit | ||
| 功能描述／Function Description | 标配/●Standard | 选配/◎Option |
| T型槽模板／T-slot template | ● | |
| 複动紅锁模装置／Intractive clamping device | ● | |
| 油压电器保护装置／Hydraulic & electric interlock device | ● | |
| 油压安全保护／Hydraulic safety protection | ● | |
| 自动调模功能／Automatic adjustment of mould height | ● | |
| 开关模、脱模电子尺控制／Mold open & close and ejector transducer control | ● | |
| 定量式自动集中润滑系统／Automatic centralized lubrication of quantitative | ● | |
| 可调节式模板支撑装置／Adjustable sliding feet | ● | |
| 高硬度轨道板／High rigidity rail board | ● | |
| 自动安全门／Automatic safety door | ● | |
| —组分水器／One set maniflod | ● | |
| 抽芯（中子）2组动模板／2 sets of core pulling on moving platen | ● | |
| 机台內安全踏板裝置／Safety pedal device | ● | |
| 螺丝孔模板／Screw hole template | ◎ | |
| 欧规模具安装模板／European standard template | ◎ | |
| 大柱抽离装置／Tie bar puller system | ◎ | |
| 透视型分水器／Perspective maniflod | ◎ | |
| 快插头分水器／Quick coupling maniflod | ◎ | |
| 吹气阀／Air valve | ◎ | |
| 热浇道顺序阀／Sequence vavle | ◎ | |
| 开模顶出同步／ Mold Opening and ejection synchronization | ◎ | |
| 开模储料同步／Mold Opening and charging synchronization | ◎ | |
| 机架加高／Highten frame | ◎ | |
| 开模行程加长／Increase mold opening stoke | ◎ | |
| 减少最小模厚／Decrease mold closing stoke | ◎ | |
| 取物平台／Pick up platform device | ◎ | |
| 液压单元／Hydraulic Unit | ||
| 功能描述／Function Description | 标配/●Standard | 选配/◎Option |
| 伺服油泵／Servo motor system | ● | |
| 吸油口锁闭装置／Oil suction locked device | ● | |
| 加大油泵电机功率／Increase pump motor capacity | ◎ | |
| 续能器快速注射／Accumulator rapid injection | ◎ | |
| 注射伺服阀／Inject servo Valve | ◎ | |
| 油位警报／Oil level alarm | ◎ | |
| 冷水阀／Cold water valve | ◎ | |
| 电气单元／Electric Unit | ||
| 功能描述／Function Description | 标配/●Standard | 选配/◎Option |
| 缔洲控制器／DIHZHOU controller | ● | |
| 各动作工况实时监视功能／Real time working condition monitor | ● | |
| 生产数据监测功能／Monitoring for production data | ● | |
| 故障报警显示功能／Automatic shows error | ● | |
| 注射压力转保压功能／Injection pressure transfer holding function | ● | |
| I/O监视显示／I/O monitoring display | ● | |
| 三色警报灯／Three-color warning light | ● | |
| 电机过载保护／Servo motor overload protection | ● | |
| 前后门紧急停止按钮／Emergency stop button or safety door | ● | |
| 380V/16A五芯插座2组／380V/16A 5-core power socket 2 sets | ● | |
| 220V/10A三芯插座1组／220V/16A 3-core power socket 1 set | ● | |
| 加热双重保护／Cold start protection | ● | |
| 加热固态继电器控制／Heating solid relay control | ● | |
| 实时锁模力监测／Real time mold clamping force monitor | ● | |
| 计算机网络集中控制系统／Computer network central control system | ● | |
| KEBA控制器／KEBA controller | ◎ | |
| 380V/32A五芯插座／380V/32A 5-core power socket | ◎ | |
| 380V/16A五芯插座／380V/16A 5-core power socket | ◎ | |
| 220V/10A三芯插座／220V/16A 3-core power socket | ◎ | |
| 伺服动力系统变压器／Servo power system transformer | ◎ | |
| 欧规12机械手接口／Euromap 12 manipulator interface | ◎ | |
| 欧规67机械手接口／Euromap 67 manipulator interface | ◎ | |
| 热流道控制系统与接口／Hot runner control and interface | ◎ | |
| 光栅保护装置／Protective light grid device | ◎ | |
| 安全继电器装置／Safety relay monitoring | ◎ | |
| 其他／Others | ||
| 功能描述／Function Description | 标配/●Standard | 选配/◎Option |
| 机器标准颜色／Standard color | ● | |
| 防震机床垫脚／Adjustable leveling pad | ● | |
| 说明书、模具压板、标准随车配件／Manual book、Clamping bar、Standard spare parts | ● | |
| 液压夹模装置／Quick mould change system | ◎ | |
| 地脚螺栓／Anchor bolt | ◎ | |
| 特殊颜色／Special color | ◎ | |
| 机械手／Robot | ◎ | |
| 磁力架／Hopper magnet | ◎ | |
| 冷水机／Chiller | ◎ | |
| 模温机／Mold temperature controller | ◎ | |
| 除湿机／Dehumidifier | ◎ | |
| 自动上料机／Auto-loader | ◎ | |
| 粉碎机／Crusher | ◎ | |
| 搅拌机／Blender | ◎ | |
| 干燥机／Dryer | ◎ | |
在线留言
如果您对我们的产品感兴趣，请给我们留言，我们会尽快与您联系！